Angel Hair / 20 mm / 270° / IP68
The fine line.
Reads round from most angles.
10 px/m, 100 mm pitch, 21 W/m max. The most weatherproof strand we make, and thin enough to disappear into the design.
Angel Hair 20 mm / 1 m sample
Drag to turn, scroll or pinch to zoom.
The 3D view needs WebGL. The picture above is a frame of it; every number is in the sheet below.
Size
Shape
Look
Rendered to the real numbers: diameters, pixel pitch, 28 mm steel end caps, NL4 feed. Spaghetti's minimum bend is 2 in (50 mm) to centerline. Angel Hair and Bucatini bends are checked per shape, so ask. The Inside view is an illustrative section of the construction: solid diffused silicone around a double-sided PCB. Need the geometry in your own software? The design kit has GDTF, STEP, OBJ and GLB.
- Pixels per m
- 10
- Pixel pitch
- 100 mm
- Power, max
- 21 W/m
- Ingress
- IP68
| Diameter | 20 mm |
|---|---|
| Emission | 270° |
| Profile | Round, diffused silicone, steel end caps both ends |
| Ingress rating | IP68 |
| Minimum bend radius | Bend check per shape. Tell us the radius and we will confirm it. |
| Pixels | WS2811 RGB, SMD 5050, 6 LEDs per pixel, 10 px/m, 100 mm pitch |
| Cut increment | 100 mm (custom lengths cut on the pitch) |
| Input | 24 VDC, 21 W/m max, 0.88 A/m at full white |
| Max run per output | 10 m: 100 px, 300 ch, 1 universe |
| Connections | NL4 both ends, 18/3 or 16/3 SJOOW feeders |
| Rental lengths | 3 / 5 / 10 m, custom on request |
| Rigging | Rigging rings in pairs: one each end, one every 4 to 5 m |
| Control | KG3 PXL CTRL (sACN / Art-Net / DMX) or KG3 Magic Controllers (WLED) |
Angel Hair emits 270 degrees and reads round from most angles. Point the opaque back at the mount and nobody sees it. Power figures are maximums at full white. No UL claims, no brightness claims we have not measured.
Stock lengths, ready to patch.
One output and one universe per run. Need another length? The run calculator does any length in m or ft.
| Run | Pixels | Channels | Universes | Power, max | Current at 24 V |
|---|---|---|---|---|---|
| 1 m | 10 | 30 | 1 | 21 W | 0.9 A |
| 3 m | 30 | 90 | 1 | 63 W | 2.6 A |
| 5 m | 50 | 150 | 1 | 105 W | 4.4 A |
| 10 m | 100 | 300 | 1 | 210 W | 8.8 A |
Spec Angel Hair when
- Fine lines that have to read as light, not fixture
- Wet locations and outdoor installs (IP68)
- Outlines, garlands and floor lines where the tube itself should vanish
- Long clean runs where weight matters
Not sure? Tell us the look and the room and we will tell you which size and how to bend it: [email protected].
Draw it in.
GDTF fixture with modes for 1, 3, 5 and 10 m runs, plus STEP, OBJ and GLB straight runs with steel end caps. Vectorworks, Capture, grandMA3 and any GDTF app. Setup notes for each app are on the design kit page.